7
English
About Indicator Display
How to Use
Operating status
Searching for device*
Pairing
Connect
Charge
Waiting to be
connected
Connecting
Remaining battery
level low
Full charge
Indicator display patterns
Flashing
Lit
Off
Charging
BlueRed
Remaining
battery level
ON : Press and hold the Power button (for about 4 seconds) to turn on the power.
The headphones are capable of making Bluetooth connections, playing music and receiving incoming calls.
Please use the headphones in accordance with applications. Please note
that we cannot guarantee the operation
of applications of the Bluetooth
device.
OFF : When the power is on, press and hold the Power button (for about 3 seconds) to shut off the power.
Power supply
* The lamp ashes red rapidly if you pair a device when the remaining battery level is low.
* If the headphones are switched to pairing mode
by mistake, turn the power off and on again.
The indicator of the headphones displays the following operating status by ashing or turning on.
(Indicator: blue)
Beep
♪
(Indicator: red)
Beep
♪
Wear the side of the headphones marked with “L” (left) on the left ear and the
side marked with “R” (right) on the right ear and adjust the earpieces for best t
(refer to "About the earpieces").
*Turn the volume of the connected device to the minimum level and put on
the headphones.
How to Wear
Using the Noise-Cancelling Function
Turn the NC switch ON. The NC indicator (green) lights when the NC switch is
turned ON.
The noise-cancelling function can be used when there is no Bluetooth device connected.
NC switch
NC indicator (green)
Long press
To Next Page
Loading...
Need help?
General
Weight and Dimensions
