A Harman International Company
▲ Simple, intuitive operation
▲ Easy installation
▲ Separate-component-quality audio
performance
▲ Adjustable input levels for each source
▲ Independent bass and treble levels for each
PX-700 room
▲ Convenient, expanded programming via
PC or laptop
▲ Create and maintain extensive IR library
▲ Import/export utilities for merging/updating
master library
▲ Rack-mountable chassis
▲ Eight audio inputs plus a paging input for
each zone
▲ Front-panel IR receiver, rear-panel IR
In/Out jacks
▲ Built-in RS-232 interface accessible from either
front or rear panel
▲ Built-in IR learning device
▲ Zone-linking capabilities
▲ Any five of eight sources available from
KPS101 Keypad in each zone
▲ Eight sources available from touchscreens and
handheld remotes
▲ Selectable turn-on source in each zone
▲ Each zone assignable to one of three ALL ON
groups (or none)
▲ Expandable to 36 zones with additional
PX-700 controllers
▲ Compatible with PX-603 Multiroom Expander
(add up to three rooms per zone)
▲ Compatible with Audioaccess multiroom,
12-channel amplifiers
Features
ConnectorComplement/Specifications
Inputs
▲ Eight stereo audio inputs with buffered
loopthru capability
▲ One mono page input
▲ Trigger input allows sharing of audio sources
with other systems
▲ Four-conductor keypad input
▲ PC Link jack RS-232 interface on front panel
▲ Nine-pin D-sub RS-232 interface on back panel
Outputs
▲ Six-room preamp outputs (one per zone)
▲ Six independent fixed outputs
▲ One record output from the main zone
▲ Six programmable 12VDC trigger outputs
(one per zone)
▲ Eight dedicated IR source outputs
▲ One all-IR source output
Audio
▲ Connector: gold-plated RCA jack
▲ Input Impedance: 20kΩ
▲ Maximum Input Level
(for 0.1% THD+N at any output): 2.0VRMS
▲ Output Impedance: 330Ω
▲ Maximum Output Level
Source-Buffered Outputs: 2.0VRMS
Primary Outputs: 2.75VRMS
Expansion Outputs: 2.0VRMS
▲ Gain
Source-Buffered Outputs: 0dB (unity gain)
Primary Outputs: 18.5dB
(volume set at 100)
Expansion Outputs: –1dB
▲ S/N (Input: 2.2VRMS, 1kHz, primary
room volume at unity gain;
Measurement Bandwidth: 22kHz)
Source-Buffered Outputs: >113dB
Primary Outputs: >95 dB
Expansion Outputs: >100dB
▲ Frequency Response
Source-Buffered Outputs: 10Hz to 110kHz,
±1dB
Primary Outputs: 10Hz to 70kHz,
±1dB
Expansion Outputs: 10Hz to 75kHz,
±1dB
▲ THD + Noise (Input: 1VRMS, 1kHz,
primary room volume at unity gain;
Measurement Bandwidth: 30kHz)
Source Buffered Outputs: <0.003%
Primary Outputs: <0.006%
Expansion Outputs: <0.005%
▲ L/R Crosstalk (at 1kHz)
Source-Buffered Outputs: <–110dB
Primary Outputs: <–92dB
Expansion Outputs: <–104dB
▲ Source-to-Source Crosstalk
(at 1kHz, any two sources)
Source-Buffered Outputs: <–110dB
Primary Outputs: <–100dB
Expansion Outputs: <–105dB
▲ Volume Control: 0 to 100dB in 0.5dB steps
▲ Bass: shelving type, ±12dB in 2dB steps
at 100Hz
▲ Treble: shelving type, ±12dB in 2dB steps
at 10kHz
Trigger Inputs and Outputs
▲ Connector: 3.5mm Mini Phone Jack
▲ Trigger Out and Zone Trigger Output Voltage:
8 to 16VDC (depending on line voltage and load),
tip positive
▲ Page Trigger In: dry contact
▲ Trigger In: 4 to 30VDC, tip positive;
3 to 24VRMS AC
Power Inlet
▲ Connector: male IEC320
▲ Power Requirement: 115V AC, 50/60Hz,
50 watts (not including switched outlet)*
Switched Outlet
▲ Connector: NEMA 5-15R*
▲ Maximum Load: 300 watts
Dimensions
▲ 17-5/16" W x 4" H x 15-1/2" D
(440mm x 102mm x 394mm)
(includes connectors and feet)
Weight
▲ 11.5 lb (5kg)
*120V version. 230V version power require-
ment is 230V AC, 50/60Hz, 50 watts;
switched outlet connector is female IEC320.
Audioaccess
250 Crossways Park Drive
Woodbury, NY 11797
www.audioaccess.com
888.691.4171
Fax: 516.682.3510
©2003 Harman International Industries, Incorporated
Part No. AAPX-700PI
PX-700sellsheet 10/29/03 5:23 PM Page 2
To Previous Page
Loading...