AudioBahn AW1006T - User Manual

Critical safety information regarding potential hearing loss from high sound pressure levels.

Polished chrome aluminum cast basket ensures perfect alignment and rigidity for high SPL.

1-piece flared aluminum voice coil and former for strength and heat dissipation.

Black anodized aluminum former for efficient thermal transfer and improved power handling.

Extended pole piece provides a more linear magnetic field, lowering distortion.

Stepped deeper back plate with vent for increased excursion and cooling.

4-layer, edge-wound voice coil design allows for various impedance loads and dual 4 ohm setup.

Resilient foam surround provides consistent support for linear cone motion and damping.

Flat spider design balances linear compliance and provides symmetrical voice coil control.

Protective and aesthetic chrome finish, an addition to enclosures.

Physical dimensions of the woofers including depth, hole size, diameter, and displacement.

Box specifications for a space-saving design including air space, port size, and tuning.

Box specifications for a balanced performance design with optimal tuning and response.

Box specifications for high SPL output, not for competition, with specific tuning.

Box specifications for sealed enclosures, including minimum and maximum volumes.

Frequency response curve for the AW1006T woofer in a space saver enclosure.

Frequency response curve for the AW1006T woofer in an everyday bass performer enclosure.

Frequency response curve for the AW1006T woofer in an ultimate SPL bass enclosure.

Frequency response curve for the AW1206T woofer in a space saver enclosure.

Frequency response curve for the AW1206T woofer in an everyday bass performer enclosure.

Frequency response curve for the AW1206T woofer in an ultimate SPL bass enclosure.

Frequency response curve for the AW1506T woofer in a space saver enclosure.

Frequency response curve for the AW1506T woofer in an everyday bass performer enclosure.

Frequency response curve for the AW1506T woofer in an ultimate SPL bass enclosure.

Guidelines for constructing a rigid and sealed enclosure using MDF and bracing.

Formula and method for calculating box volume, accounting for displacement.

Explanation of passive and active crossovers and recommendation for optimal performance.

Steps to diagnose and resolve issues like distorted sound, loss of performance, or rattling.

Safety precautions for installation, including avoiding hazards and proper fuse usage.

Statement that specifications are subject to change without notice.

Details on warranty period, coverage, and requirements for manufacturer defects.

List of conditions and damages not covered by the Audiobahn warranty.

Procedures for obtaining warranty service, acquiring RA numbers, and contact details.