AudioCodes Media Pack MP-124 - Page 260

SIP User's Manual 260 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
Web: Enable VoiceMail URI
EMS: Enable VMURI
Enables or disables the interworking of target and cause for
redirection from Tel to IP and vice versa, according to RFC
4468.
[EnableVMURI]
 [0]

Disable = Disable (default).
[1]
Web/EMS: Retry-After Time
Enable = Enable
Determines the time (in seconds) used in the Retry-After
header when a 503 (Service Unavailable) response is
generated by the device.
The time range is 0 to 3,600. The default value is 0.
[RetryAfterTime]
Web/EMS: Enable P-Associated-URI
Header
Determines the device usage of the P-Associated-URI
header. This header can be received in 200 OK responses
to REGISTER requests. When enabled, the first URI in the
P-Associated-URI header is used in subsequent requests
as the From / P-Asserted-Id headers value.
[EnablePAssociatedURIHeader]
 [0]

Disable (default).
[1] Enable.
Note:
Web/EMS: Source Number Preference
P-Associated-URIs in registration responses is
handled only if the device is registered per endpoint.
Determines the SIP header used to determine the Source
Number in incoming INVITE messages.
[SourceNumberPreference]
 ''

= (empty string) Use device's internal logic for header
preference (default).
'FROM'
Web/EMS: Forking Handling Mode
= Use the source number received in the From
header.
Determines how the device behaves when it receives
multiple SIP 18x responses when forking is used by the
Proxy, for Tel-to-IP calls.
[ForkingHandlingMode]
 [0]

Parallel handling = The device opens a voice stream
toward the first 18x SIP response that includes an SDP
and re-opens the stream toward any subsequent 18x
responses with an SDP.
[1] Sequential handling = The device opens a voice
stream toward the first 18x SIP response that includes
an SDP and disregards any 18x response with an SDP
received thereafter (default).
Note:
Web/EMS: Enable Reason Header
Regardless of the ForkingHandlingMode value, once
a SIP 200 OK response is received, the device uses the
RTP information and re-opens the voice stream, if
necessary.
Enables or disables the usage of the SIP Reason header.
[EnableReasonHeader]
 [0]

Disable.
[1]
Web: Reliable Connection Persistent
Mode
Enable (default).
Determines whether all TCP/TLS connections are set as
persistent and therefore, not released.
[ReliableConnectionPersistentMode]
 [0]

= Disable (default) - all TCP connections (except
those that are set to a proxy IP) are released if not used
by any SIP dialog\transaction.
[1] = Enable - TCP connections to all destinations are