AudioCodes Media Pack MP-124 - Page 270

SIP User's Manual 270 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
IP Group Table
This [IPGroup] ini
[IPGroup]
FORMAT IPGroup_
file table parameter configures the IP Group table.
The format of this parameter is as follows:
Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable,
IPGroup_RoutingMode, IPGroup_SRD,
IPGroup_MediaRealm, IPGroup_ClassifyByProxySet,
IPGroup_ProfileId
For example:
IPGroup 1 = 0, "dol gateway", 1, firstIPgroup, , 0, -1, 0, 0, -
1, 0, , 1, 1;
IPGroup 2 = 0, "abc server", 2, secondIPgroup, , 0, -1, 0, 0,
-1, 0, , 1, 2;
IPGroup 3 = 1, "IP phones", 1, thirdIPGroup, , 0, -1, 0, 0, -1,
0, , 1, 2;
;
[\IPGroup]
Notes:
 This table parameter can include up to 9 indices (1-9).


For a detailed description of the
The parameters IPGroup_Type,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_RoutingMode, IPGroup_SRD,
IPGroup_MediaRealm, and
IPGroup_ClassifyByProxySet are currently not
applicable and must be left empty (or -1).
ini file table's
parameters and for configuring this table using the Web
interface, refer to ''Configuring the IP Groups''
99
on page
.
 For an explanation on using ini file table parameters,
refer to ''Format of ini File Table Parameters''
191
on page
.