Parameter Description
Account Table
This [Account] ini file table parameter configures the Account table for
registering and/or authenticating (digest) Hunt
[Account]
FORMAT Account_Index = Account_
Groups (e.g.,
an IP-PBX) to a Serving IP Group (e.g., an Internet Telephony
Service Provider - ITSP). The format of this parameter is as
follows:
ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password,
Account_HostName, Account_Register,
Account_ContactUser, Account_ApplicationType
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
;
[\Account]
This table can include up to 10 indices (where 1 is the first
index).
Notes:
The parameter Account_ApplicationType is not applicable.
You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same
The parameter Account_ServedIPGroup is not applicable.
Hunt
For a detailed description of this table's parameters and for
configuring this table using the Web interface, refer to
''
Group
to several ITSP's (i.e., Serving IP Groups).
Configuring the Account Table'' 102 on page .
For an explanation on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' 191 on page .
Web: Use Default Proxy
EMS: Proxy Used
Proxy Registration Parameters
Enables the use of a SIP Proxy server.
[IsProxyUsed]
[0]
No = Proxy isn't used - the internal routing table is used
instead (default).
[1]
If you are using a Proxy server, enter the IP address of the
Proxy server in the 'Proxy Sets table' (refer to ''
Yes = Proxy is used. Parameters relevant to Proxy
configuration are displayed.
Configuring the
Proxy Sets Table'' 95 on page ). If you are not using a Proxy
server, you must configure the device's 'Tel to IP Routing'
table (described in ''Configuring the Tel to IP Routing Table''
131
on page ).
Web/EMS: Proxy Name Defines the Home Proxy Domain Name. If specified, the Proxy
Name is used as the Request-URI in REGISTER, INVITE, and
other SIP messages, and as the host part of the To header in
INVITE messages. If not specified, the Proxy IP address is
used instead.
The value must be string of up to 49 characters.
[ProxyName]
To Next Page
Loading...
