Parameter Description
Destination Phone Number
Manipulation Table for Tel to IP Calls
Number Manipulation Tables
This
[NumberMapTel2IP]
ini
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_
file table parameter manipulates the destination
number of Tel-to-IP calls. The format of this parameter is
as follows:
DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType,
NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID,
NumberMapTel2Ip_ SrcIPGroupID
For example:
NumberMapTel2Ip 0 =
01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 =
10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
;
[\NumberMapTel2Ip]
This table parameter can include up to 100 indices.
Notes:
The parameters SourceAddress and
IsPresentationRestricted are not applicable. Set these
to $$.
The parameter RemoveFromLeft, RemoveFromRight,
Prefix2Add, Suffix2Add, LeaveFromRight, NumberType,
and NumberPlan are applied if the called and calling
numbers match the DestinationPrefix and SourcePrefix
conditions.
The parameters NumberMapTel2Ip_ SrcIPGroupID,
NumberMapTel2Ip_NumberType and
NumberMapTel2Ip_NumberPlan are not applicable. Set
these to $$.
The manipulation rules are executed in the following
order: RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and Suffix2Add.
Parameters can be skipped by using two dollar signs
('$$').
To configure manipulation of destination numbers for
Tel-to-IP calls using the Web interface, refer to
''Configuring the Number Manipulation Tables''
124
on page
).
For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' 191 on page .
Destination Phone Number
To Next Page
Loading...
