Version 7.2 797 Mediant 1000B Gateway & E-SBC
User's Manual 47. System Status
47 System Status
This section describes how to view various system statuses.
47.1 Viewing Device Information
You can view hardware and software information about the device on the Device
Information page. The page also lists Auxiliary files that have been installed on the device
and allows you to remove them (see ''Deleting Auxiliary Files'' on page 739).
To view device information:
Open the Device Information page (Monitor menu > Monitor menu > Summary tab >
Device Information).
Figure 47-1: Viewing Device Information (Example)
47.2 Viewing Device Status on Monitor Page
The Web interface's Monitor page provides basic status and information on the device. The
page is useful in that it allows you to easily obtain an overview of the device's operating
status at a single glance.
To view device status and information on the Monitor home page:
On the Menu bar, click Monitor or if you are already in the Monitor menu's Navigation
tree, click Monitor.
The Monitor page displays the following groups of information:
Device Information pane:
• 'Address': IP address of the device's OAMP interface
To Next Page
Loading...
