AudioCodes Mediant 1000B SBA - Step 17 (Optional) SNMP Setup

Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 131 Microsoft Lync Server
11.17 Step 17 (Optional) SNMP Setup
The AudioCodes SBA device can be configured to report SNMP info and traps to an
external SNMP Trap Manager, such as the AudioCodes Element Management System
(EMS). You can configure the following:

Stop and start the SNMP service.

Private and public community strings.

SNMP trusted hosts

SNMP Trap Destination i.e. the IP address of the SNMP trap destination. For
example, EMS.
 To setup SNMP:
1. Select the Tools tab, and then select the 'SNMP Setup' check box.
The SNMP Setup screen is displayed:
Figure 11-76: SNMP Setup Screen
If the SNMP Service is running, an adjacent green sign is indicated.
2. In the SNMP Manager Communities pane, configure the public and private community
strings.
3. If you wish to configure trusted hosts, select the 'From the Following Hosts Only'
check box, and then in the 'SNMP Trusted Hosts' field, enter the names of the SNMP
Trusted Hosts.
4. In the 'Trap Community Name' field, enter the name of the SNMPv2 community (user)
name.
5. In the 'SNMP Trap Destination' field, enter the IP address of the destination trap
manager e.g. EMS. You can enter up to five SNMP trap destinations.
6. Click Apply.