Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 139 Microsoft Lync Server
11.19.2 Starting and Stopping SBA Services
You can stop and start SBA services as described in the procedure below.
To start and stop services:
1. Select the Tools menu tab, and then select the 'Start or Stop Service' check box; the
Start and Stop Service page appears:
Figure 11-88: Start and Stop Service Page
2. Stop or Start the following services:
• Front-End Server
• Mediation Server
• Replica Replicator Agent
• Logging Service Agent
3. Select one of the following actions as required:
• Start All: Starts the services on the SBA
• Stop All: Stops the services on the SBA
• Restart Server: Restarts the server
• Shutdown Server: Shuts down the server
To Next Page
Loading...