Installation & Maintenance Manual C. Upgrading Hardware
Version 6.8 281 Microsoft Lync Server
C Upgrading Hardware
This appendix describes the following upgrade procedures:
Upgrading an Enhanced PSTN gateway to an SBA (see Appendix C.2 on page 282).
Upgrading from a Hard Drive to a Solid State Disk (SSD) (see Appendix C.3 on page
284).
Upgrading the OSN Platform to M1KB SBA ES/EO (see Appendix C.4 on page 286).
Replacing the OSN module for RMA purposes (see Appendix C.5 on page 289).
Note: The OSN modules are hot-swappable and can be inserted and extracted without
disrupting other non-related OSN services running on the device. Therefore, you can
insert and replace the OSN modules without powering down the device.
C.1 Verifying the SBA Kit Items
Before you commence the SBA hardware upgrade, ensure that your SBA kit for upgrading
the Mediant 1000B hardware is shipped with the following items:
OSN Module
HDMX Module
SBA Upgrade and Recovery USB dongle
License Stickers and Agreements for Microsoft Windows 2008 Server R2 and
Microsoft Lync Server Std 2010 64Bit EMB.
Cable mini HDMI to HDMI 1.5m for monitor connections.
Cable micro USB to USB 1.5m for serial connections.
If any items are missing or damaged, contact your AudioCodes sales representative.
To Next Page
Loading...