Installation & Maintenance Manual 9. Defining the Branch Office Topology using Topology Builder
Version 6.8 63 Microsoft Lync Server
6. In the dialog box, do the following:
a. In the ‘City’ field, type the name of the city in which the branch site is located.
b. In the ‘State/Province’ field, type the name of the state or region in which the
branch site is located.
c. In the ‘Country/Region Code’ field, type the two-digit calling code for the country
in which the branch site is located.
d. Click Next; the following dialog box appears:
Figure 9-9: New Branch Site Successfully Defined
7. Select the check box 'Open the New Survivable Branch Appliance Wizard when this
wizard closes', and then click Finish; the following dialog box appears:
Figure 9-10: Define the Survivable Branch Appliance FQDN
To Next Page
Loading...