Installation & Maintenance Manual 64 Document #: LTRT-40111
Mediant 1000B SBA
8. In the ‘FQDN’ field, type the FQDN of the SBA, and then click Next.
Note: The Survivable Branch Appliance FQDN that you configured in the ‘FQDN’ field
must be the same as the FQDN that you configured using the ADSI Edit program in
Section 0 on page 39.
The following dialog box appears:
Figure 9-11: Select the Front End Pool
9. From the ‘Front End pool’ drop-down list, select the Front End pool to be used with
this SBA, and then click Next; the following dialog box appears:
Figure 9-12: Select an Edge Server
To Next Page
Loading...