Installation & Maintenance Manual 88 Document #: LTRT-40111
Mediant 1000B SBA
11.3 Step 3: Change Admin Password
The Change Admin Password option resets the local Administrator password.
To change the Administrator password:
1. Select the Setup tab, and then select the 'Change Admin Password' check box; the
following screen is displayed:
Figure 11-12: Change Admin Password Screen
2. In the 'Current Password' field, enter the current password.
3. In the 'New Password’ field', enter a new password, and then in the 'Password
Confirm' field, enter the new password again.
4. Click Apply; the following screen appears:
To Next Page
Loading...