Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 91 Microsoft Lync Server
3. From the drop-down list, select the appropriate time zone.
4. Select the Date tab, and then define the date and time.
5. Click Apply; the “Operation Completed Successfully” message appears on the bottom
of the screen.
6. Click Apply; a notification message box appears:
Figure 11-17: Set Date and Time – Notification Message
7. Click OK; the following confirmation screen appears:
Figure 11-18: Set Date and Time – Applied Changes
.
8. Click Next to proceed to the next setup task.
A green check mark appears next to to the 'Set Date and Time' option under the Setup
tab, as shown in the figure below.
To Next Page
Loading...