Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 93 Microsoft Lync Server
11.5 Step 5: Join to a Domain
The Join to Domain option enables you to join the SBA application to a domain.
Note: This procedure requires you to reboot the SBA server to successfully apply the
configuration. However, if you forget to do so, the server automatically reboots after a
session timeout. When this occurs, the login screen appears with the following popup
message: "The SBA server needs to be rebooted. Please insert your credentials and
click on Login.The server will then be rebooted". After the server reboots, the following
message appears: "The SBA server has been rebooted automatically". You can then
login to the SBA Management Interface.
To join the SBA application to a domain:
1. Select the Setup tab, and then select the 'Join to a Domain' check box; the following
screen appears:
Figure 11-20: Join to a Domain Screen
Figure 11-21: Domain Details
To Next Page
Loading...