AudioCodes Mediant 1000B - Step 1: Configure IP Network Interfaces

Configuration Note 16 Document #: LTRT-12470
Avaya Aura Messaging & Nortel CS1000
5.3 Step 1: Configure IP Network Interfaces
This step describes how to configure the IP network interfaces.
 To configure the IP network interfaces:
1. Open the IP Interfaces Table page (Configuration tab > VoIP > Network >
IP Interfaces Table).
2. Modify the existing network interface:
a. Select the 'Index' radio button of the OAMP + Media + Control table row, and
then click Edit.
b. Configure the interface as follows:
Parameter Value
IP Address
10.15.17.20 (IP address of the gateway)
Prefix Length
16 (subnet mask in bits for 255.255.0.0)
Default Gateway
10.15.0.1
Interface Name
Voice (arbitrary descriptive name)
Primary DNS Server IP Address
10.1.1.10
Secondary DNS Server IP Address
10.1.1.11
Underlying Device
vlan 1
Figure 5-2: Edit Record
3. Click Submit.