Configuration Note 5. Gateway Configuration
Version 6.8 19 Mediant 1000B
5.5 Step 3: Configure TDM BUS Settings
This step describes how to configure TDM Bus settings.
To configure TDM Bus settings:
1. Open the 'TDM Bus Settings' page (Configuration tab > VoIP > TDM >
TDM Bus Settings).
Figure 5-4: TDM Bus Settings
2. From the ‘PCM Law Select’ drop-down list, select ‘MuLaw’.
3. From the ‘TDM Bus Clock Source’ drop-down list, select ‘Network’.
4. Click Submit.
To Next Page
Loading...
