AudioCodes Mediant 1000B - Page 24

Configuration Note 24 Document #: LTRT-12470
Avaya Aura Messaging & Nortel CS1000
5. From the ‘Transport Type’ drop-down list, select the transport type for each AAM.
Figure 5-10: Proxy Address and Transport Type
Note: When not configured, the value of the ‘SIPTransportType‘ parameter is used.
6. If your Avaya Aura Messaging System includes multiple AAM’s, from the ‘Proxy Load
Balancing Method’ drop-down, select Round Robin to load balance the calls across
all AAM’s in your Avaya Aura Messaging System.
Figure 5-11: Proxy Sets Table
7. Open the 'IP Group Table' page (Configuration tab > VoIP > VoIP Network > IP
Group Table).
8. Click Add to add IP Group 1.
9. Configure the ‘Contact User’ field if necessary.