AudioCodes Mediant 1000B - Step 13: Configure CNG Detector Mode

Configuration Note 5. Gateway Configuration
Version 6.8 31 Mediant 1000B
5.15 Step 13: Configure CNG Detector Mode
This step describes how to configure CNG Detector Mode.
 To configure CNG Detector Mode:
1. Open the 'Fax/Modem/CID Settings' page (Configuration Tab: VoIP > Media >
Fax/Modem/CID Settings).
Figure 5-19: General Settings
2. From the ‘CNG Detector Mode’ drop-down list, select ‘Disable’.
3. Click Submit.