Configuration Note 40 Document #: LTRT-12470
Avaya Aura Messaging & Nortel CS1000
5. Open the Advanced Parameters page (Configure tab > VoIP > SIP Definitions >
Advanced Parameters).
6. From the ‘Media CDR Report Level’ drop-down list, select Start & End Media to
enable additional call information.
Figure 7-2: Advanced Parameters
AudioCodes has also developed the following advanced diagnostic tools for high-level
troubleshooting:
PSTN Trace: used for monitoring and tracing PSTN elements (E1/T1) in AudioCodes
digital gateways (Mediant 1000). These utilities are designed to convert PSTN trace
binary files into textual form.
DSP Recording: used for monitoring the DSP operation (e.g., RTP packets and
events).
To Next Page
Loading...
