Version 6.8 41 Mediant 1000B
Configuration Note A. AudioCodes ini File
A AudioCodes ini File
The ini configuration file of the Mediant 1000B, corresponding to the existing customer
configuration, is shown below:
Note: To load and save an ini file, use the Configuration File page (Maintenance tab >
Software Update menu > Configuration File).
;**************
;** Ini File **
;**************
;Board: Mediant 1000
;HW Board Type: 47 FK Board Type: 71
;Serial Number: 8680944
;Slot Number: 1
;Software Version: 6.80A.231.002
;DSP Software Version: 620AE3=> 660.11
;Board IP Address: 130.5.175.60
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 130.5.175.3
;Ram size: 497M Flash size: 64M
;Num of DSP Cores: 8 Num DSP Channels: 40
;Num of physical LAN ports: 3
;Profile: NONE
;;Key features:;Board Type: Mediant 1000 ;IP Media: Conf VXML
VoicePromptAnnounc(H248.9) ;E1Trunks=8 ;T1Trunks=8 ;Channel Type:
RTP DspCh=240 IPMediaDspCh=240 ;Security: IPSEC MediaEncryption
StrongEncryption EncryptControlProtocol ;Coders: G723 G729
NETCODER GSM-FR G727 ILBC G722 ;DSP Voice features: IpmDetector
;PSTN Protocols: ISDN IUA=4 CAS ;Control Protocols: MSFT MGCP
MEGACO SIP ;Default features:;Coders: G711 G726;
;--------- HW components ---------
;
; Slot # : Module type : # of ports : # of DSPs
;----------------------------------------------
; 1 : FALC56 : 1 : 2
; 2 : Empty
; 3 : Empty
; 4 : Empty
; 5 : Empty
; 6 : Empty
;----------------------------------------------
[SYSTEM Params]
To Next Page
Loading...
