AudioCodes Mediant 1000B - Page 1003

Version 7.2 1003 Mediant 1000B Gateway & E-SBC
User's Manual 65. Configuration Parameters Reference
Parameter Description
management platforms:

SNMP (restores default users and retains other
configured users):
1) Set acSysGenericINILine to
WEBPasswordControlViaSNMP = 1, and reset the
device with a flash burn (set
acSysActionSetResetControl to 1 and
acSysActionSetReset to 1).
2) Change the username and password in the
acSysWEBAccessEntry table. Use the following
format:
Username acSysWEBAccessUserName:
old/pass/new
Password acSysWEBAccessUserCode:
username/old/new
Customizing Web GUI
[WelcomeMessage]
configure system > welcome-
msg
Defines a welcome message displayed on the Web
interface's Web Login page.
The format of the ini file table parameter is:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index =
WelcomeMessage_Text
[\WelcomeMessage]
For Example:
FORMAT WelcomeMessage_Index =
WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome
message ***" ;
WelcomeMessage 3 = "**********************************" ;
For more information, see Creating a Login Welcome
Message on page 71.
Note:
 Each index row represents a line of text. Up to 20 lines
(or rows) of text can be defined.
 The configured text message must be enclosed in
double quotation marks (i.e., "...").

If the parameter is not configured, no Welcome message
is displayed.
[UseProductName] Enables the option to customize the name of the device
(product) that appears in the management interfaces.
 [0] = Disabled (default).
 [1] = Enables the display of a user-defined name, which
is configured by the UserProductName parameter.
For more information, see Customizing the Product Name
on page 69.
[UserProductName] Defines a name for the device instead of the default name.
The value can be a string of up to 29 characters.
For more information, see Customizing the Product Name