AudioCodes Mediant 1000B - Page 1267

Version 7.2 1267 Mediant 1000B Gateway & E-SBC
User's Manual 65. Configuration Parameters Reference
Parameter Description
[ \HTTPProxyHost ]
For more information, see ''Configuring HTTP Proxy Hosts''
on page
288.
EMS Services Table
EMS Services
configure network >
http-proxy ems-serv
[EMSService]
Defines an HTTP-based EMS Service so that the device can act as
an HTTP Proxy that enables AudioCodes EMS to manage
AudioCodes equipment (such as IP Phones) over HTTP when the
equipment is located behind NAT (e.g., in the LAN) and EMS is
located in a public domain (e.g., in the WAN).
The format of the ini file table parameter is as follows:
[ EMSService ]
FORMAT EMSService_Index = EMSService_ServiceName,
EMSService_PrimaryServer, EMSService_SecondaryServer,
EMSService_DeviceLoginInterface, EMSService_EMSInterface;
[ \EMSService ]
For more information, see ''Configuring an HTTP-based EMS
Service'' on page 290.