AudioCodes Mediant 4000 SBC - Using Dial Plan Tags for SBC IP-To-IP Routing

CHAPTER20 SIP Definitions
Mediant 4000 SBC | User's Manual
The CLI lets you export Dial Plans and Dial Plan rules to a remote server, using the
export-csv-to command under (config-voip)# sbc dial-plan. For more
information, refer to the CLI Reference Guide.
➢ To export all configured Dial Plans with their corresponding Dial Plan rules:
1. Open the Dial Plan table.
2. From the 'Action' drop-down menu, choose Export; the following dialog box appears:
3. Select the Save File option, and then click OK; the file is saved to the default folder on your
PC for downloading files.
➢ To export Dial Plan rules of a specific Dial Plan:
1. Open the Dial Plan table.
2. Select the required Dial Plan, and then click the Dial Plan Rule link; the Dial Plan Rule table
opens, displaying the rules of the selected Dial Plan.
3. From the 'Action' drop-down menu, choose Export; a dialog box appears (as shown above).
4. Select the Save File option, and then click OK; the file is saved to the default folder on your
PC for downloading files.
Using Dial Plan Tags for SBC IP-to-IP Routing
You can use Dial Plan tags with IP-to-IP Routing rules in the IP-to-IP Routing table, where tags can
be used for the following:
■ Matching routing rules by source and/or destination prefix numbers (see Using Dial Plan Tags
for Matching Routing Rules)
■ Locating destination IP Group (see Using Dial Plan Tags for Routing Destinations)
- 470 -