AudioCodes Mediant 4000 SBC - Page 831

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is included in the default CDR.
■ The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■ The default field title is "terminator=" (e.g., "terminator=yes").
■ The maximum number of characters for Syslog tabular alignment is 5.
Termination
Side
[409]
Displays the party that terminated the call. The field value is a string:
■ "LCL": SBC Outgoing leg or Tel side.
■ "RMT": SBC Incoming leg or IP side.
■ "UNKN": Unknown
For example, if the Orig field is "RMT" and this Termination Side field is "LCL",
then the called party ended the call.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "TrmSd".
■ The maximum number of characters for Syslog tabular alignment is 5.
Transport
Type
[421]
Displays the SIP signaling transport type protocol. The field value is a string:
■ "UDP"
■ "TCP"
■ "TLS"
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SigTransportType" for Gateway Syslog and Local
Storage, and "TransportType" for SBC Syslog and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 16.
Trigger
[439]
Displays the reason for the call (i.e., what triggered it):
■ "Normal": regular call
■ "Refer": call transfer
■ "AltRoute": alternative routing
■ "Forward": call forward
■ "Reroute": When a broken connection on the outgoing leg occurs, the call is
rerouted to another destination according to the IP-to-IP Routing table
(where matching characteristics includes the trigger for reroute).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "Trigger".
■ The maximum number of characters for Syslog tabular alignment is 8.
- 798 -