CHAPTER52 Syslog and Debug Recording
Mediant 4000 SBC | User's Manual
3. Click Apply.
● You can also view logged user activities in the Web interface (see Viewing Web
User Activity Logs).
● Logging of CLI commands can only be configured through CLI or ini file.
● You can configure the device to send an SNMP trap each time a user performs an
action. For more information, see Enabling SNMP Traps for Web Activity on
page67.
Viewing Syslog Messages
You can view Syslog messages generated by the device using any of the following Syslog server
types:
■ Device's Web Interface: The device provides an embedded Syslog server, which is accessed
through the Web interface (Troubleshoot tab > Troubleshoot menu > Message Log ). You
can select the Syslog messages displayed on the page, and then copy-and-paste them into a
text editor such as Notepad. This text file (txt) can then be sent to AudioCodes support team
for diagnosis and troubleshooting.
The displayed logged messages are color-coded based on message type:
- 826 -
To Next Page
Loading...
