AudioCodes Mediant 4000 SBC - Page 932

CHAPTER60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Parameter Description
■ [swu] Device Software Update = Software updates
(i.e., loading of cmp file) through the Software Upgrade
Wizard.
■ [naa] Non-Authorized Access = Attempts to log in to
the Web interface with a false or empty username or
password.
■ [spc] Sensitive Parameters Value Change =
Changes made to "sensitive" parameters:
✔ (1) IP Address
✔ (2) Subnet Mask
✔ (3) Default Gateway IP Address
✔ (4) ActivityListToLog
■ [ll] Login and Logout = Web login and logout
attempts.
■ [cli] CLI Activity = CLI commands entered by the
user.
■ [ae] Action Executed = Logs user actions that are not
related to parameter changes. The actions can include,
for example, file uploads, file delete, lock-unlock
maintenance actions, LDAP clear cache, register-
unregister, and start-stop trunk. In the Web, these
actions are typically done by clicking a button (e.g., the
LOCK button).
Note: For the ini file parameter, enclose values in single
quotation marks, for example: ActivityListToLog = 'pvc',
'afl', 'dr', 'fb', 'swu', 'naa', 'spc'.
[EnableParametersMonitoring] Enables the monitoring, through Syslog messages, of
parameters that are modified on-the-fly.
■ [0] = (Default) Disable
■ [1] = Enable
'Debug Recording Destination
IP'
configure troubleshoot
> logging settings >
dbg-rec-dest-ip
[DebugRecordingDestIP]
Defines the IP address of the server for capturing debug
recording.
'Debug Recording Destination
Port'
configure troubleshoot
> logging settings >
dbg-rec-dest-port
[DebugRecordingDestPort]
Defines the UDP port of the server for capturing debug
recording. The default is 925.
'Enable Core Dump'
[EnableCoreDump]
Enables the automatic generation of a Core Dump file upon
a device crash.
■ [0] Disable (default)
- 899 -