Version 6.4 379 March 2012
SIP User's Manual 18. GW and IP to IP
• 'Dest Phone Prefix' and 'Source Phone Prefix': enter the asterisk (*) symbol to
indicate all destinations (besides Japan) and all sources respectively.
• 'Dest IP Group ID': select 2 to indicate the destination IP Group to where the calls
must be sent, i.e., to ITSP-A.
• 'IP Profile ID': enter "1" to indicate the IP Profile configured for G.711.
7. Index #6: routes dialed calls (four digits starting with digit 4) from IP-PBX to remote
IP-PBX users. The device searches its database for the remote users registered
number, and then sends an INVITE to the remote user's IP address (listed in the
database):
• 'Source IP Group ID': select 3 to indicate received (inbound) calls identified as
belonging to the IP Group configured for the IP-PBX.
• 'Dest Phone Prefix': enter the "4xxx#" to indicate all calls dialed from IP-PBX that
include four digits and start with the digit 4.
• 'Dest IP Group ID': select 4 to indicate the destination IP Group to where the calls
must be sent, i.e., to remote IP-PBX users.
• 'IP Profile ID': enter "1" to indicate the IP Profile configured for G.711.
To Next Page
Loading...
