AudioCodes Mediant 600 - 25 System Status; Viewing Device Information

Version 6.4 509 March 2012
SIP User's Manual 25. System Status
25 System Status
This section describes how to view system status.

Syslog messages - see Viewing Syslog Messages on page 539

Device information - see 'Viewing Device Information' on page 509

Ethernet port information - see 'Viewing Ethernet Port Information' on page 510
25.1 Viewing Device Information
The Device Information page displays the device's specific hardware and software product
information. This information can help you expedite troubleshooting. Capture the page and
e-mail it to AudioCodes Technical Support personnel to ensure quick diagnosis and
effective corrective action. This page also displays any loaded files used by the device
(stored in the RAM) and allows you to remove them.
 To access the Device Information page:

Open the Device Information page (Status & Diagnostics tab > System Status
menu > Device Information).
 To delete a loaded file:

Click the Delete button corresponding to the file that you want to delete. Deleting a file
takes effect only after device reset (see 'Resetting the Device' on page 479).