AudioCodes Mediant 800 MSBG - Page 117

CLI Reference Guide 5. VoIP Commands
Version 6.4 117 January 2012
Arguments Description

rmv-calling-name
 rmv-cli-when-restr
 send-screen-to-ip
 send-screen-to-isdn
 swap-rdr-n-called-nb
 tdm-tunneling
 trkgrps-to-snd-ie
 usr2usr-hdr-frmt
 uui-ie-for-ip2tel
 uui-ie-for-tel2ip
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the gateway to maintain a permanent RTP connection.
(config-voip)# gw digitalgw digital-gw-parameters
(gw-digitalGW-params)*# set tdm-tunneling on