Version 6.2 115 February 2011
SIP User's Manual 3. Web-Based Management
¾ To configure SRDs:
1. Open the 'SRD Settings' page (Configuration tab > VoIP menu > Control Network
submenu > SRD Table).
Figure 3-62: SRD Settings Page
2. From the 'SRD Index' drop-down list, select an index for the SRD, and then configure
it according to the table below.
3. Click the Submit button to apply your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
Note: The 'SRD Settings' page also allows you to define a SIP Interface in the SIP
Interface table, instead of navigating to the 'SIP Interface Table' page as
described in ''Configuring SIP Interface Table'' on page 117.
Table 3-16: SRD Table Parameters
Parameter Description
SRD Name
[SRD_Name]
Mandatory descriptive name of the SRD.
The valid value can be a string of up to 21 characters.
To Next Page
Loading...
