Version 6.2 329 February 2011
SIP User's Manual 3. Web-Based Management
¾ To edit connections:
1. Access the configuration tabs:
• In the 'Connections' page, click the Edit
icon corresponding to the network
connection that you want to edit; the General tab is displayed, showing general
properties of the connection type (e.g., WAN Ethernet connection).
• From the WAN Access page (see ''WAN Access Settings'' on page 224), click
the
Click here for Advanced Settings link.
Figure 3-288: Editing Network Connection - General Tab
2. Select the Settings tab:
Figure 3-289: Editing Network Connection - Settings Tab
To Next Page
Loading...
