AudioCodes Mediant 800 MSBG - Page 656

SIP User's Manual 656 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
Notes:
 For this parameter to take effect, a device reset is
required.
 You can configure up to 64 VLAN tag priorities (i.e.,
indices 0-63).
 The valid range of the parameter DiffServ is 0-63.
 The valid range of the parameter VlanPriority is 0-7.
 To set a default VLAN Priority (used for ARPs and
automated ICMP packets, as well as for IP Packets
without DiffServ value), set a VLAN Priority value for
DiffServ 0.
Layer-3 Class of Service (TOS/DiffServ) Parameters
Web: Media Premium QoS
EMS: Premium Service Class Media Diff
Serv
[PremiumServiceClassMediaDiffServ]
Defines the DiffServ value for Premium Media CoS
content.
The valid range is 0 to 63. The default value is 46.
Notes:
 For this parameter to take effect, a device reset is
required.
 The value for the Premium Control DiffServ is
determined by the following (according to priority):
9 IPDiffServ value in the selected IP Profile
(IPProfile parameter).
9 PremiumServiceClassMediaDiffServ.
Web: Control Premium QoS
EMS: Premium Service Class Control Diff
Serv
[PremiumServiceClassControlDiffServ]
Defines the DiffServ value for Premium Control CoS
content (Call Control applications).
The valid range is 0 to 63. The default value is 40.
Notes:
 For this parameter to take effect, a device reset is
required.
 The value for the Premium Control DiffServ is
determined by the following (according to priority):
9 SiglPDiffserv value in the selected IP Profile
(IPProfile parameter).
9 PremiumServiceClassControlDiffServ.
Web: Gold QoS
EMS: Gold Service Class Diff Serv
[GoldServiceClassDiffServ]
Defines the DiffServ value for the Gold CoS content
(Streaming applications).
The valid range is 0 to 63. The default value is 26.
Note: For this parameter to take effect, a device reset is
required.
Web: Bronze QoS
EMS: Bronze Service Class Diff Serv
[BronzeServiceClassDiffServ]
Defines the DiffServ value for the Bronze CoS content
(OAMP applications).
The valid range is 0 to 63. The default value is 10.
Note: For this parameter to take effect, a device reset is
required.