AudioCodes Mediant 800 MSBG - Page 755

Version 6.2 755 February 2011
SIP User's Manual 12. Configuration Parameters Reference
Parameter Description
Web: MWI Source Number
EMS: MWI Source Name
[MWISourceNumber]
Determines the calling party's phone number used in the Q.931
MWI Setup message to PSTN. If not configured, the channel's
phone number is used as the calling number.
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use
the DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
Web: Forward on Busy Digit
Pattern (Internal)
EMS: Digit Pattern Forward On
Busy
[DigitPatternForwardOnBusy]
Determines the digit pattern used by the PBX to indicate 'call
forward on busy' when the original call is received from an
internal extension.
The valid range is a 120-character string.
Web: Forward on No Answer Digit
Pattern (Internal)
EMS: Digit Pattern Forward On No
Answer
[DigitPatternForwardOnNoAnsw
er]
Determines the digit pattern used by the PBX to indicate 'call
forward on no answer' when the original call is received from an
internal extension.
The valid range is a 120-character string.
Web: Forward on Do Not Disturb
Digit Pattern (Internal)
EMS: Digit Pattern Forward On
DND
[DigitPatternForwardOnDND]
Determines the digit pattern used by the PBX to indicate 'call
forward on do not disturb' when the original call is received from
an internal extension.
The valid range is a 120-character string.
Web: Forward on No Reason Digit
Pattern (Internal)
EMS: Digit Pattern Forward No
Reason
[DigitPatternForwardNoReason]
Determines the digit pattern used by the PBX to indicate 'call
forward with no reason' when the original call is received from
an internal extension.
The valid range is a 120-character string.
Web: Forward on Busy Digit
Pattern (External)
EMS: VM Digit Pattern On Busy
External
[DigitPatternForwardOnBusyExt]
Determines the digit pattern used by the PBX to indicate 'call
forward on busy' when the original call is received from an
external line (not an internal extension).
The valid range is a 120-character string.
Web: Forward on No Answer Digit
Pattern (External)
EMS: VM Digit Pattern On No
Answer Ext
[DigitPatternForwardOnNoAnsw
erExt]
Determines the digit pattern used by the PBX to indicate 'call
forward on no answer' when the original call is received from an
external line (not an internal extension).
The valid range is a 120-character string.
Web: Forward on Do Not Disturb
Digit Pattern (External)
EMS: VM Digit Pattern On DND
External
[DigitPatternForwardOnDNDExt]
Determines the digit pattern used by the PBX to indicate 'call
forward on do not disturb' when the original call is received from
an external line (not an internal extension).
The valid range is a 120-character string.
Web: Forward on No Reason Digit
Pattern (External)
EMS: VM Digit Pattern No Reason
External
[DigitPatternForwardNoReasonE
xt]
Determines the digit pattern used by the PBX to indicate 'call
forward with no reason' when the original call is received from
an external line (not an internal extension).
The valid range is a 120-character string.