AudioCodes Mediant 800 MSBG - Page 884

SIP User's Manual 884 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
[PrtFileURL]
Specifies the name of the Prerecorded Tones file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[CptFileURL]
Specifies the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[CasFileURL]
Specifies the name of the CAS file and the path to the server (IP
address or FQDN) on which it is located.
For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[TLSRootFileUrl]
Specifies the name of the TLS trusted root certificate file and the
URL from where it's downloaded.
Note: For this parameter to take effect, a device reset is required.
[TLSCertFileUrl]
Specifies the name of the TLS certificate file and the URL from
where it's downloaded.
Note: For this parameter to take effect, a device reset is required.
[UserInfoFileURL]
Specifies the name of the User Information file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.