AudioCodes Mediant 800 - Page 1231

CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
■ [1] End Call = CDRs are sent at the end (SIP BYE) of
each call.
■ [2] Start & End Call = CDRs are sent at the start (SIP
INVITE) and end of each call.
■ [3] Connect & End Call = CDRs are sent at call
connection (200 OK) and end of each call.
■ [4] Start & End & Connect Call = CDRs are sent at
the start, connection, and end of each call.
■ [5] Connect Only = CDRs are sent at call connection.
Note:
■ To specify the REST server, use the
[RestCdrHttpServer] parameter.
■ For the device to generate CDRs, you must enable
Syslog messaging (see the [EnableSyslog]
parameter).
■ CDRs are sent in JSON format.
'REST CDR HTTP Server
Name'
configure system > cdr
> rest-cdr-http-server
[RestCdrHttpServer]
Defines the REST server (by name as configured in the
Remote Web Services table) to where the device sends
CDRs through REST API.
The valid value is a string (i.e., name of the REST server).
By default, no value is defined.
Note:
■ The parameter value is case sensitive.
■ To enable CDR generation for the REST server, see
the [RestCdrReportLevel] parameter.
■ The REST server is configured in the Remote Web
Services table (see Configuring Remote Web Services
on page257).
'File Size'
configure troubleshoot
> cdr > file-size
[CDRLocalMaxFileSize]
Defines the size (in kilobytes) of each locally stored CDR
file. When the Current file reaches this size, the device
creates a CDR file containing all the CDRs from the
Current file.
The valid value is 100 to 10,000. The default is 1024.
Note: CDR file creation works together with the 'Rotation
Period' parameter, whereby the file is created as soon as
one of the parameter's ('File Size' or 'Rotation Period')
settings are fulfilled (whichever is met earlier). For
example, if the 'File Size' parameter is 100 and 'Rotation
Period' is 60, and the file size reaches 100 kbytes after
only 30 minutes has passed, the device creates the CDR
file.
'Number of Files'
configure troubleshoot
> cdr > files-num
[CDRLocalMaxNumOfFiles]
Defines the maximum number of locally stored CDR files.
If the maximum number is reached and a new file is
created, the oldest file is deleted to make space for the
new file (i.e., FIFO).
The valid value is 2 to 4096 . The default is 5.
- 1191 -