CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
■ [3] Events Only = Transparent with
Events.
Note: You can also configure this feature
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see Configuring IP Profiles.
'V.22 Modem Transport Type'
configure voip > media fax-modem >
V22-modem-transport-type
[V22ModemTransportType]
Determines the V.22 modem transport
type.
■ [0] Disable = Transparent.
■ [2] Enable Bypass (default)
■ [3] Events Only = Transparent with
Events.
Note: You can also configure this feature
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see Configuring IP Profiles.
'V.23 Modem Transport Type'
configure voip > media fax-modem >
V23-modem-transport-type
[V23ModemTransportType]
Determines the V.23 modem transport
type.
■ [0] Disable = Transparent.
■ [2] Enable Bypass (default)
■ [3] Events Only = Transparent with
Events.
Note: You can also configure this feature
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see Configuring IP Profiles.
'V.32 Modem Transport Type'
configure voip > media fax-modem >
V32-modem-transport-type
[V32ModemTransportType]
Determines the V.32 modem transport
type.
■ [0] Disable = Transparent.
■ [2] Enable Bypass (default)
■ [3] Events Only = Transparent with
Events.
Note:
■ The parameter applies only to V.32
and V.32bis modems.
■ You can also configure this feature
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For
more information, see Configuring IP
Profiles.
'V.34 Modem Transport Type'
configure voip > media fax-modem >
V34-modem-transport-type
[V34ModemTransportType]
Determines the V.90/V.34 modem
transport type.
■ [0] Disable = Transparent.
■ [2] Enable Bypass (default)
- 1280 -