AudioCodes Mediant 800B - Page 1168

User's Manual 1168 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
V34-fax-transport-type
[V34FaxTransportType]
Determines the V.34 fax transport method (whether V34 fax falls
back to T.30 or pass over Bypass).
 [0] = Transparent
 [1] = (Default) Relay
 [2] = Bypass
 [3] = Transparent with Events
Note: To configure V34FaxTransportType to 1 (i.e., fax relay),
you also need to configure FaxTransportMode to 1 (fax relay).
V.21 Modem Transport Type
configure voip > media fax-
modem > V21-modem-transport-
type
[V21ModemTransportType]
Determines the V.21 modem transport type.
 [0] Disable = (Default) Transparent.
 [2] Enable Bypass
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 436.
V.22 Modem Transport Type
configure voip > media fax-
modem > V22-modem-transport-
type
[V22ModemTransportType]
Determines the V.22 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 436.
V.23 Modem Transport Type
configure voip > media fax-
modem > V23-modem-transport-
type
[V23ModemTransportType]
Determines the V.23 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 436.
V.32 Modem Transport Type
configure voip > media fax-
modem > V32-modem-transport-
type
[V32ModemTransportType]
Determines the V.32 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note:
 The parameter applies only to V.32 and V.32bis modems.
 You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 436.
V.34 Modem Transport Type
configure voip > media fax-
modem > V34-modem-transport-
type
[V34ModemTransportType]
Determines the V.90/V.34 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see 'Configuring IP Profiles' on page 436.