- 2 -
Features
High-Voltage Line Driver
The OVERDRIVE PLUS is a line driver that takes the input voltage
of a high performance source unit and increases it (up to 13 volts peak).
It then delivers this punched up signal to the amplier for more lifelike
sound with less noise, less distortion and more dynamic range. In short: it
makes music played on your system sound more like live music.
Input for Optional Dash Control
An optional dash control (sold separately) can be plugged into the
OVERDRIVE PLUS to allow you to adjust the output gain remotely. You
can use this to have a remote system volume control or to have a remote
amp volume control.
Low Noise / High Current Output Circuitry
Driving long lengths of cable can present a nasty capacitive load to the
source that has to drive them. The OVERDRIVE PLUS’s low-impedance,
high-current output circuitry can easily handle long cable runs without
their associated problems.
Output Voltage Indicators
Setting voltage levels for best signal-to-noise performance can be a real
pain — especially when you have to get out the old digital voltmeter and
nd a way to make those probes stay put while you try to read the dancing
LCD display. With the OVERDRIVE PLUS’s voltage indicator LEDs,
we remove some of the pain. The rst LED indicates that you are in the
OVERDRIVE PLUS’s comfortable working range. The second LED lets
you know you are over 8 Volts and better make sure your amp can take
that much input.
To Next Page
Loading...