Audiolab M-DAC Service Manual

15. Test Optical and BNC Digital CD Output function (with AP or external DAC), Digital
Output greater then =>500mV Pk-Pk into 75 Ohms.
16. Completion of Post Soak Test performance verification.
1. Connect to audio System (via RCA's), Lock to external SPDIF or USB Source,
confirm no undue noise function OK.
2. Test all Digital inputs (Coax1, 2, Optical1&2)andUSB(WithPC) repeat listening
test.
3. Confirm Remote function.
4. Completion of Listening tests.
1. Restore unit to Factory defaults.
2. End of Shipping settings.
Listening Test
Shipping Settings
MAINTENANCE ALIGNMENT PROCEDURE
M-DAC
M-DAC-Ageing Test Step-P2/2
17

Audiolab M-DAC Specifications

General

Brand	Audiolab
Model	M-DAC
Category	Media Converter
Language	English