Version 1.32
1 x Mains switch
1 x Fused mains socket
1 x Fuse holder
1 x T3.15A 250V fuse (Note: ‘T’ denotes slow-blow)
2 x DPDT switches
4x Red speaker terminals
4 x Black speaker terminals
2 x 22R 2W Resistors
The audio PCB pack contains (2 off per kit):
2 x 6922 9-way valve bases (for V3 and V4)
4 x 0.33uF/0.47uF 630V signal capacitors (C1,C2,C10,C13)
2 x 22uF 450V Axial electrolytic capacitors (C5,C6)
2 x 47uF 100V Axial electrolytic capacitors (C3,C4)
2 x 100uF 25V Axial electrolytic capacitors (C9,C12)
2 x 470R 5W wirewound resistors (R30,R31)
1 x 8K66 1W resistor (R18)
4 x 47K 2W resistors (R6,R7,R8,R29)
1 x 374R 2W resistor (R25)
1 x 15K resistor (R17)
7 x 1K resistors (R9,R10,R11,R11b,R12,R21,R22)
1 x 261R resistor (R28)
3 x 576K resistors (R2,R3,R26)
2 x 220K resistors (R4,R5)
1 x 75K resistor (R24)
1 x 470R resistor (R27)
1 x 100R resistor (R14)
1 x 61.9K resistor (R1)
1 x 68K resistor (R23)
1 x 16.2K resistor (R13)
2 x 105R 1W resistors
4 x 66R5 0.6W resistors for heater decoupling
13 x PCB terminal pins
14 x Blue PTFE sleeves
The screws and fittings pack contains:
4 x Mounting feet
1 x M5 X 80mm washer and nut
8 x M4 washers
8 x M4 screws with nuts
12 x M3 X 12mm hexagonal metal stand-offs
1 x Earth tag
9 x M3 washers
46 x M3 screws plain
14 x M3 nuts
4 x M3 countersunk screws
The wire pack contains:
1.4m screened input cable
2m of Orange wire (used generally for HT wiring and High Voltage)
To Next Page
Loading...
