Audiovox D1210 - Product Contents; Indoor Installation

5) The digital audio output connector (optical) converts
electrical signals into optical signals (light) and trans-
fers them to an amplifier. These optical signals are
immune from electrical interference, and they also have
minimal effect on other equipment.
C. Contents
1. TV /DVD Combination Unit o w/Speakers
2. Coaxial Connector
3. Remote Control
4. AC to DC Adapter
5. Cig. Lighter Adapter
6. Wireless IR Headphones(2 pcs)
7. 3.5mm-RCA AV Cable
8. Storage Bag and Mounting Bag w/Mounting Straps
9. Owner’s Manual
D. Indoor Installation (Refer to Figure 1)
Swing up the rear metal stand and place the unit on a table or
other level surface. Plug one end of the AC to DC adapter into
the DC 12V input on the right side of the main unit, then plug the
other end into the 110V AC power receptacle.
Figure 1
Note: Detach the two speakers from the main unit, and only use
headphones or connect your Car Audio in the car.
10