Audiovox D1210 - DVD Player General Setup Options; TV Display Aspect Ratio; Angle Mark Display Setting

1) Select GENERAL SETUP using UP/DOWN and then press
ENTER to enter the general page.
a. Select TV DISPLAY using UP/DOWN, and then press RIGHT
to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
* NORMAL/PS: When the player is connected to a normal
TV, and a wide picture is shown on the full screen, with a
portion that may be cut off automatically.
* NORMAL/LB: When the player is connected to a normal TV,
and a wide picture is shown on the screen, with black strip at
both top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
b. Select ANGLE MARK using UP/DOWN, and then press
RIGHT to enter the submenu. Choose to show an angle mark
on the screen using UP/DOWN and then press ENTER to
confirm the setting. Press LEFT to return.
20