Audiovox FPE2000 - Page 32

Using Keypad buttons
1 Press CH5button, the channel number increases;
2 Press CH6 button, the channel number decreases.
NOTE: This feature works after a channel search is complete.
Using Channel up/down buttons
Press button to switch between the current channel and
previous channel.
Using previous channel button
32
1 To select one-digit channel numbers:
Input the channel using the 0-9 number button, then press
Channel Enter button to confirm.
2 To select two-digit channel numbers:
3 To select three-digit channel numbers:
Note: The period between presses should be within 2 seconds.
* You can press DSP button to
Know current channel number
information.
Selecting channel
S.M
Operations (continued)
Input the channel using the 0-9 number button, then press
Channel Enter button to confirm.
Input the channel using the 0-9 number button directly.