ADX51
OVERVIEW
The ADX51 is a professional pre-polarized condenser microphone used for stage,
studio and broadcast applications. The ADX51 is known for its clear, accurate response
and flexibility to handle close or distance miking for a wide variety of acoustic
instruments.
Characterized with a uniformly controlled cardioid polar pattern, the ADX51 is
designed to capture the acoustics of the instrument being miked while at the same
time isolating it from the rest of the instruments on stage. With a wide frequency
range of 40 Hz - 18 kHz, the ADX51 features a 14 mm gold vapor diaphragm and a -10
dB pad and bass roll-off filter at 150 Hz.
The ADX51 is very easy to position, durable and manufactured to high standards
and tight tolerances. The ADX51 has a precision machined brass body, durable black
E-coat finish, steel mesh grill, and gold plated XLR connector.
SUPPLIED ACCESSORIES
DCLIP - Heavy-duty nylon molded snap on clip
P1 - Carrying pouch
WS1C - External foam windscreen for reducing wind, sibilance and pop noise
OPTIONAL ACCESSORIES
APS2 - Two-channel 48 V phantom power supply. 110 V switchable to 240 V.
Detachable power cord.
DFLEX - Dual pivot rim mounted clip with extra wide butterfly jaws.
CBL20 - 20’ premium XLR-XLR balanced mic cable. Quad conductor, twisted
pair with braided shield for conductivity. 6 mm PVC jacketed.
PD133 - Optional two-layer mesh pop diffuser for controlling acoustic plosives.
SMT25 - Low profile shock mount system with nylon cable and
thumbscrew for positioning.
Studio Condenser
Microphone
FEATURES
· Premium electret condenser microphone
· Smooth accurate frequency response
· Switches for -10 dB pad and bass roll-off
· Designed, assembled & tested in the USA
· 3 year warranty
APPLICATIONS
· Drum overheads, hi hat, cymbals
· Acoustic instruments
· Percussion table
· Group vocal, spoken word
· Ambient room miking
· Audience mics for in-ear monitors
DCLIP P1 WS81C APS2 DFLEX CBL20 PD133 SMT25
To Next Page
Need help?
General
