Audyssey MultEQ Pro - Page 3

Audyssey Installation Reference Guide
4
5


 
  


 



 


 
  


 



 
MultEQ Pro Calibration
The MultEQ Pro calibration process is outlined in 16 steps.
Follow these steps for proper installation of the Audyssey
Sound Equalizer.
STEP 1
Connect the Sound Equalizer’s inputs to the preamplifier/
processor’s outputs (A). Both devices should be powered off
at this point.
Warning: Do not connect the Sound Equalizer’s 1/Mic input at
this time. Doing so will cause feedback to be played through your
speakers, which can possibly damage them.
STEP 2
Connect the Sound Equalizer’s outputs to the amplifier
inputs (B). Both devices should be powered off at this point.
A
B