If no information is available,just the frequencyandthe<No Radio
Text> messagewill display.
I. Scan FM station
In FM mode,you canalsotunethe stationmanually.Pressthe
'hl" button to adjust the FM frequencies with 50 kHz down or up
respectively.
Ifpress and hold the " " or " " button, it will scan to previous
or
or next station. (for details seeScan settings in section 4.2. I Settings).
2.Adjust volume
Tum the Volume Control Button clockwise or anti-clockwise to increase
or decrease volume respectively.
3.Memory Settings
The Memory Settings allow you to saveyour favourite radio stations.
First, chooseyour preferredradio stationandhold down the 'Memory
Button'for 2seconds.Then,usetheRotaryButtontoassignyourprefened
station a number on the station list. After this, press 'Select' to save.
5.5 Bluetooth mode
Pressthe 'Power' button to tum on the deviceandthenpress'Source'
button to change to Bluetooth mode. Turn on the Bluetooth function on
your mobile device and look for "MB420" in the Bluetooth device list.
After successfullyconnecting,adjustthevolume on your audiodevice
to the desired volume level.
5.6 USB Mode
I. Connect your USB device to the unit.(MAX 64GB)
2. Press"Source" until "USB" appearson thedisplay screen.Music
files stored on the USB will automatically play.
-5_
3. Press " Scan/Pair/>ll " to pause or resume playback.
4. Press or hl " to skip to the previous or next track.
5.7 Aux-in Mode
Press the 'Power' button to turn on the device and then press "Source"
button to change to AUX-IN mode. Use a 3.5mm audio cable to connect
thespeakerto anaudio sourceto play music from the audio source.
5.8 Advance settings
Advance Settings allow you to tailor the DAB/DAB+/FM radio with a
variety of options to suit you. To accessAdvance settings from any mode,
pressandhold the "Menu/lnfo" button for 2 seconds.
5.8.1 DAB+ radio mode
Use the Volume Control Button to cycle through the different menus,
thenpress'Select' your preferredoption. TheAdvance Settingmenu
options are:
• Full scan
• Manual tune
•DRC
• Prune
• System
•INFO
1. Full scan
Under advance setting, turn the Volume Control Button to find Full
scanthrough the menu list, then press "Select" to confirm. The radio will
automatically startscanningafter 3 seconds.Oncea scanis complete,
theradio returnsto playing thepreviously- selectedstationor first
station on the station list.
-6-
To Next Page
Loading...
