AUMA SAExC 16.1 - 2 Identification; Name Plate

2. Identification
2.1. Name plate
Each device component (actuator, controls, motor) is equipped with a name
plate. Figure 1 shows the arrangement of name plates on the device.
Identification data on the actuator name plate:
Identification data on the controls’ name plate:
7
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
Non-Intrusive
Operation instructions with actuator controls AUMATIC ACExC 01.1 Profibus DP
Figure 1
1 Actuator name plate 3 Motor name plate
2 Controls name plate 4 Additional plate, e.g. KKS plate
5 Ex approval plate
1 Type and size of actuator
2 Commission number
a
CC
AUMA Riester GmbH&Co.KG
D-79379 Müllheim
No : 3302MD 19302
SAExC 07.1-
Com No: 1309533
F10
1
2
Figure 2
auma
AC 01.1
Com No: 1309595
ACP M S:
P:1,5kW
No: 0902MA97286
KMS: TP180/001
11F1-2 0-- 000
3 ~ 400V IP67
Control: RS 485
1
2
3
Figure 3
1 Type and size of the controls
2 Commission number
3 Wiring diagram/control