What to do if the actual temperature exceeds the set temperature on my Auplex HP3804C Power Tool?
If the actual temperature exceeds the set temperature on your Auplex Power Tool, it's likely due to a broken relay. The suggested solution is to replace the relay.
Why Auplex Power Tool has no display after powering up?
If your Auplex Power Tool shows no display after powering it on, the issue might be a poor outlet contact or a blown fuse. Try changing the power cable and checking the outlet. If that doesn't work, replace the fuse with the supplied backup fuse.
Why is the color off and the image blurred with my Auplex Power Tool?
If the color is off or the image is blurred when using your Auplex Power Tool, it could be that you're pressing for too long or the temperature is too high. Adjust the temperature and/or time settings to resolve this issue.
What to do if Auplex Power Tool fails to heat up but the control box display is OK?
If your Auplex Power Tool fails to heat up but the control box display is OK, the heat plate may be burnt out. Check the heat plate connections, and replace the heat plate if necessary.
General| Brand | Auplex |
|---|---|
| Model | HP3804C |
| Category | Power Tool |
| Language | English |
To Next Page